D04FR Diesel Used Engine Assembly For Excavator SK130-8 SK140-8 Water Cooling
Specification
| Car name: Complete Engine |
| Model Number: D04FR |
| Cylinder stroke: 130 |
| Application: Excavator |
| Cylinder diameter: 102 |
| valve: 16 valve |
| Cooling: Water cooling |
| Output: 74kw |
| Injection: Electric |
| Cylinders of number: 4 |
Description
Main Parts of an Internal Combustion Engine Below:
Piston
The first, a piston is fitted to each cylinder as a face to receive gas pressure and transmit the thrust to the connecting rod. It is a prime mover in the engine. The main function of piston is to give tight seal to the cylinder through bore and slide freely inside the cylinder. Piston should be light and sufficient strong to handle gas pressure generated by combustion of fuel. So the piston is made by aluminum alloy and sometimes it is made by cast iron because light alloy piston expands more than cast iron so they need more clearances to the bore.
Connecting rod
The second, Connecting rod connects the piston to crankshaft and transmits the motion and thrust of piston to crankshaft. It converts the reciprocating motion of the piston into rotary motion of crankshaft. There are two end of connecting rod; one is known as big end and other as small end. Big end is connected to the crankshaft and the small end is connected to the piston by use of piston pin. The connecting rods are made of nickel, chrome, and chrome vanadium steels. For small engines the material may be aluminum.
Main Parts of an Internal Combustion Engine (connecting rod)
Crankshaft
Thirdly, the crankshaft of an internal combustion engine receives the efforts or thrust supplied by piston to the connecting rod and converts the reciprocating motion of piston into rotary motion of crankshaft. The crankshaft mounts in bearing so it can rotate freely. The shape and size of crankshaft depends on the number and arrangement of cylinders. It is usually made by steel forging, but some makers use special types of cast-iron such as spheroidal graphitic or nickel alloy castings which are cheaper to produce and have good service life.
