S6K Used Engine Assembly For Excavator E320C E320D Water Cooling
Specification
| Car name: Complete Engine |
| Model Number: S6K |
| Cylinder stroke: 130 |
| Application: Excavator |
| Cylinder diameter: 102 |
| valve: 16 valve |
| Cooling: Water cooling |
| Output: 99.9kw |
| Injection: Electric |
| Cylinders of number: 6 |
Description
Engine parts
Spark plug
It is used in spark ignition engine. The main function of a spark plug is to conduct a high potential from the ignition system into the combustion chamber to ignite the compressed air fuel mixture. It is fitted on cylinder head.
The spark plug consists of a metal shell having two electrodes which are insulated from each other with an air gap. When high potential current supply to spark plug it jumping from the supply electrode and produces the necessary spark.
Main Parts of an Internal Combustion Engine (spark plug)
Injector
Injector is usually used in compression ignition engine. It sprays the fuel into combustion chamber at the end of compression stroke. It is fitted on cylinder head.
Main Parts of an Internal Combustion Engine (injector)
Manifold
The main function of manifold is to supply the air fuel mixture and collects the exhaust gases equally from all cylinder. In an internal combustion engine two manifold are used, one for intake and other for exhaust. They are usually made by aluminum alloy.
Main Parts of an Internal Combustion Engine (manifold)
Camshaft
Camshaft is used in IC engine to control the opening and closing of valves at proper timing. For proper engine output inlet valve should open at the end of exhaust stroke and closed at the end of intake stroke. So to regulate its timing, a cam is use which is oval in shape and it exerts a pressure on the valve to open and release to close. It is drive by the timing belt which drives by crankshaft. It is placed at the top or at the bottom of cylinder.
Main Parts of an Internal Combustion Engine (camshaft)
Gudgeon pin or piston pin
These are hardened steel parallel spindles fitted through the piston bosses and the small end bushes or eyes to allow the connecting rods to swivel. It connects the piston to connecting rod. It is made hollow for lightness.
